|
XC3020電子器件噪聲分析儀
噪聲測試:測量半導體分立器件和集成電路的低頻至超低頻噪聲參數,測試范圍和精度滿足國家標準、國家軍用標準以及行業標準的相應產品技術規范。
可靠性分析:根據噪聲頻譜分析和時間波形分析,檢測半導體分立器件和集成電路的潛在缺陷,對其可靠性進行加嚴篩選和故障診斷,對壽命及環境應力適應性進行預估。
分立器件:電壓基準和調壓二極管,硅功率晶體管,GaAs MESFET&HEMT&HBT ,JFET,MOSFET,光電偶合器,VDMOS功率管,IGBT,特種器件等。
|
|
2810ALCR
自動測量儀:
基本精度:±0.25%
測量參數:R、L、C、D和Q
測試頻率:100Hz或1kHz
測試電壓:275mV±10%
體積:440mmX250mmX43mm
2810A LCR
automatic Meter:
Basic Accuracy: ±0.25%
Specs Tested: R,L,C,D and Q
Test Frequency: 100Hz or 1kHZ
Test Voltage: 275mV±10%
|
|
2811LCR自動測量儀:
基本精度:±0.25%
測量參數:L、C、R、D、Q及LCR限值分選
測試頻率:100Hz、1kHz、10kHz
測試電平:250mV±50mV
2811 LCR
Automatic Meter:
Basic Accuracy: ±0.25%
Specs Tested: R,L,C,D,Q and LCR Limitted Sorting
Test Frequency: 100Hz, 1kHz or 10kHz
Test Level: 250mv±50mV
|
|
XC2812LCR自動測量儀:
基本精度:±0.1%
測量參數:L、C、R、D、Q及百分比偏差多檔次分選
測試頻率:100Hz、1kHz、10kHz
測試電平:250mV±50mV
2812 LCR Automatic
Meter:
Basic Accuracy: ±0.1%
specs Tested: L,C,R,D,Q & multi-step sorting of percentage deviation
Test Frequency: 100Hz,1kHz or 10kHz
Test Level: 250mV±50mV
|
|
XC2813B 1MHz LCR自動測量儀:
測試頻率:1.000MHz±0.01%
基本精度:C:±0.1%,L、R、X、B、G均為±0.2%
測量范圍:L:0.001~99999μH
C:0.001~99999ρF
L:0.01Ω~999.9kΩ
XC2813B 1MHz
Automatic Meteer:
Measurement Frequency: 1.000MHz±0.01%
Basic Accuracy: C:±0.1%, L、R、X、B、G:±0.2%
Measurement Range: L:0.001~99999μH
C:0.001~99999ρF
L:0.01Ω~999.9kΩ
|
|
XC2815精密元件分析儀:
測量參數:L、C、R、G、D、Q、Z、r相角θ
測量頻率:20Hz~300Hz,共有42個測試點
測試電平:10mV~5V,共131個測試點
基本精度:±0.05%
測試范圍:R:0.2Ω~12MΩ
C:20ρF~1800mF
L:3μH~200H
XC2815 Precision Component analyzer
Specs Tested: L,C,R,G,D,Q,Z,r,phase angle θ
Measurement frequency: 20Hz-300khz, total 42 frequency points
Test Level: 10mV~5V,
131 level points
Basic Accuracy: ±0.05%
Measurement Range: R:0.2Ω~12MΩ
C:20ρF~1800mF
L:3μH~200H
|
|
XC2819LCR自動測量儀:
性能相當于美國HP公司的HP4263
基本精度:0.1%
測量頻率:20Hz~300kHz
測試電平:10mV~5V
測量參數:Z、Y、R、G、X、B、L、C、D、Q及相角θ,變壓器匝數比,互感系數,電流電阻。
測試范圍:L:0.5nH~100kH
C:0.01pF~1F;
R:0.02mΩ~100mΩ
Q:0.1~9999;
D:0.0001~9.9999
Rdc:0.2mΩ~10kΩ
XC2819 LCR
Automatic Test Equipment
Features are corresponded to those of HP 4263
Basjc Accuracy: 0.1%
Measurement frequency: 20Hz-300kHz
Test Level: 10mV-5V
Specs Tested: Z、Y、R、G、X、B、L、C、D、Q phase angle θ, Nm/Ns, Lm, Rdc
Measurement Range: L:0.5nH~100kH
C:0.01pF~1F; R:0.02mΩ~100mΩ
Q:0.1~9999; D:0.0001~9.9999
Rdc:0.2mΩ~10kΩ
|
|
XC2842電感自動測量儀
測量參數:電感量L和品質因數Q
測量頻率:1kHz;10kHz;
測試電平:2.5Vrms±10%正玄波(空載)
測量時間:約220ms/次
基本測量誤差(溫度20℃~24℃)
L:±[1μH+0.3%(1+0.2mH/FL+FL/20H)L] (1+1/Q)±1個字
Q:±[0.01+0.3%Q(1+Q)]±1個字
極限預置范圍:(撥碼開關)
標稱電感量:0.1μH——990H
品質因數極值:0——99.9
顯示方式:直接顯示和百分比誤差顯示
|
|
XC2853數字直流微電阻測量儀
測量范圍:1μΩ-199.99Ω;分五檔
分辯率:1μΩ
測量誤差:第1檔:±0.5%讀數值±4個字
第2檔~第5檔:±0.2%讀數值±4個字顯示:41/2位LED數字顯示
2853 Digital DC Mini
Resistance Meter
Measurement Range:1μΩ-199.99Ωin 5 steps
Resolution:1μΩ
Measurement Error:step1:±0.5%reading ±4digits
step2~step5:±0.2%reading±4digits
Display:41/2digital LED display
|
|
2510數字交流低阻表:
測量范圍:10μΩ~1.999kΩ
測量頻率:1kHz±10%
測試電平:2.5V±10%
測量誤差:滿量程的±1.0%
2510 Digital
AC Low Resistance Meter
Measurement Range: 10μΩ~1.999kΩ
Measurement Frequency: 1kHz±10%
Test Level: 2.5V±10%
Measurement Error: ±1.0% of full scale
|
|
XC2515數字兆歐表:
測量范圍:1MΩ~2000MΩ
1檔:1MΩ~100MΩ
2檔:100MΩ~2000MΩ
測量誤差:±4%讀數值±2個字
分辨率:0.1MΩ
測試電壓:1000V、500V、250V。
顯示:31/2位LED
XC2515 MW
Digital Meter
Measurement Range: 1MΩ~2000MΩ
Step1: 1MΩ~100MΩ
Step2: 100MΩ~2000MΩ
Measurement Error: ±4% reading ±2 digits
Resolution: 0.1MΩ
Test Voltage: 1000V,500V,250V
Display: 31/2 digital LED display
|
|
1773(10A)偏流源是對電感進行直流疊加特性測量進使用的偏置電源
電流電圍:0~10A
電流指示精度:±2%讀數±1個字
電流穩定度:5×10-4/分鐘
顯示:41/2位LED數字顯示。
1773(10A)Bias
Current Soruce is a Bias Power Source used to test DC Superposition Character
of Inductance.
Current Range: 0~10A
Current Accuracy: ±2% reading±1 digit
Current Stability:5×10-4/min
Disply: 41/2 digital LED.ss
|
|